Name: Linzhi Phoenix V2
SKU: 15
Availability: InStock

Slide

Linzhi Ltd. is proud to present you the Phoenix model, our latest model and one of the most powerful EtHash miners currently on the market.
Its state-of-the-art architecture will bring you the most profitable performance on the market.
This ASIC miner can reach a hashrate of more than 26 Gh/s at only 3000W per hour power consumption.
The detailed specifications of the Linzhi Phoenix Ethereum ASIC miner are presented below.

SPECIFICATIONS

➤ Hashrate: 26 Gh/s ±5%
➤ Algorithm: EtHash
➤ Minable Coins: ETC + ETHW + OCGTA + QKC + CLO + EGEM
➤ Power consumption: 3000W
➤ Power efficiency : 0.10 J/MH±10%
➤ Memory: 12Gb
➤ Size : 362 x 136 x 285 mm
➤ Operating temperature: 5 – 45 °C
➤ Cooling method: Air cooling
➤ Humidity: 5 - 95 %
➤ Number of fans: 2
➤ Fan Specifications: 4500rpm
➤ Net weight: 10,6 kg
➤ Networking connection mode: RJ45 Ethernet 10/100M
➤ Noise level: 80db
➤ Each Linzhi Phoenix ASIC miner contains two Linzhi E1500 hashing boards, which have the following technical features:
➤ Each board uses 64 computing units (chips), each of which controls 72 mixers with a 2.8 Tb/s exchange rate with decentralized memory (1 MB in one cell)
➤ Memory subsystem bandwidth – 177 Tb/s per board.
➤ Each memory mixer operates at a peak speed of 38.4Gb/s.
➤Each memory chip operates at an operating frequency of 600 MHz, using 2 cycles to access data.
➤ When working with memory, 1024-bit addressing is used.
➤ To power the Phoenix ASIC, you need to use two 12-volt power supplies with a capacity of at least 1800 watts each.
➤ For cooling, two powerful fans are used, installed on the front of the ASIC case.
➤ The back wall of the miner includes a gigabit Ethernet port; an SD card slot; two connectors for connecting additional cooling equipment.
➤ Warranty Period：The Linzhi Phoenix is covered by a 180 days warranty. The after-sales maintenance service period starts from the date of delivery.
The package contains :
1 x Linzhi Phoenix | 2 x Power Supply (PSU) | Instructions manual booklet | Cables & Connectors | USB Drive containing video tutorials ,photos, setup instructions and manual in PDF format | Invoice | Warranty papers.

Slide

Order Policy

Order confirmation

All orders are subject to acceptance by us, and we will confirm such acceptance to you by sending you a confirmation email of your order with the title :
“Linzhi Miners – New Order #*****”.
Your order will only be accepted by us. We will send you exactly what you ordered. We will not be obliged to supply any other products which are not included in the confirmation order. We reserve the right to cancel your order at any time before we have accepted the order.
We may cancel your order in the following situations:
Your payment is incomplete. And you did not complete the replenishment within 2 working days.
Your purchase quantity exceeds the purchase limit.
You purchased an invalid product. (E.g. payment for a mock link)
Please make sure we can contact you through the order information. We need to communicate with you via email or phone about possible shipping issues.

Delivery

The delivery will only be arranged after the order is fully paid. Delivery services are provided by third parties such as DHL and FedEx.
1. The date of shipment:
The estimated delivery time will be announced on the shop details page.
The shipment time is up to 7 working days for "In Stock" products. We will notify you of the exact delivery time by email.
It will take you 5-7 business days to receive the package after you get the tracking number (except for some countries with difficult customs clearance)
2. Logistics Services Provided by Third Parties
We will provide free shipment service through third-party logistics services.
We are not responsible for the transportation problems caused by the following situations:
Delivery delays due to queuing issues in the logistics warehouse.
The product was lost during transportation.

Shipment issues

1. Taxes and Custom Duties
Our products are excluded from all value-added taxes and customs duties. You will be solely responsible for paying any outstanding taxes and duties as per your country’s law and customs.
2. The product has been returned.
We will re-ship your order, but any additional charges (“Return Expense”) shall be borne by you.
The following situations will cause return：
You didn’t pay the tariff in time.
The delivery address is incorrect.
The local logistics company failed to contact you.
Problems with the customs clearance
If you encounter problems during customs clearance, please submit a support ticket. Staff will assist you to deal with related issues.
We will notify you of shipping issues via sales@linzhiphoenix.io.

Order details

It is not allowed to change the delivery address after placing the order.
If you need to specify a logistics company or declare a price, please leave a note when placing an order.
Products may be sent from different warehouses. If you purchase several products, you will receive multiple tracking numbers.

Payment

Linzhi Ltd. accepts cryptocurrency payments.
At checkout, select the cryptocurrency payment option. From the drop-down list select the digital asset you wish to pay with. You will be redirected to complete the payment on the order confirmation page.
Make the transaction
You will see the payment amount, a unique address to send the transaction, as well as a QR code (for XRP transactions, do not forget the destination tag). You can proceed as follows:
1. Click on the “Open In Wallet” button to open a supported wallet on your device.
2. Scan the QR code with your mobile wallet.
3. Copy/paste the displayed amount and address to your cryptocurrency wallet. You will notice a confirmation screen right after.
The payment is confirmed
Your transaction will typically be detected within a few seconds after it was broadcasted to the network, regardless of the currency you are paying with. Once detected, on the page, it will be displayed a ‘Payment Pending’ status which will change to ‘Payment Confirmed’ after 1 confirmation.
The payment is now completed and your order will be processed and shipped within the next 2 working days.

Payment issues

1. A failed order
If your payment is incomplete (lack of handling fees), your order will fail. The staff will provide you with a replenishment link via email.
Please note that all replenishment links will only be sent to you via sales@linzhiphoenix.io. Please don’t trust payment links from other mailboxes.
2. Overpayment
After the order is generated, Linzhi Ltd. does not provide a refund service. Please invest cautiously.
If you overpay, we will provide you with a refund service. Please submit a support ticket. Staff will assist you to deal with related issues.
You must provide the following information: # order number; # payment voucher; and # payment processor reference code. A customer support representative will confirm the refund information and wallet address with you.
Please notice, we will deduct the handling fee from the refund amount. Handling fees include transaction fees of 1% from Coinbase. DAI, USDC, and ETH on the Ethereum chain will charge an additional gas fee of $25.
Refunds will be completed within 3 working days.
3. Cancelled orders
If you have completed the payment, but the order is not successfully generated. Please submit a support ticket. Staff will assist you to deal with related issues.
You will need to provide: the payment voucher; payment processor reference code; transaction link.

Warranty

The Linzhi Phoenix is covered by a 180 dayswarranty. The after-sales maintenance service period starts from the date of delivery.
Please read the “Warranty Policy”.

Slide

Linzhi Phoenix Warranty Policy

Free Maintenance

If your product is under warranty, we will Maintain the product for free and will pay for the return postage.
Warranty Period: The Linzhi Phoenix is covered by a 180 days warranty. The after-sales maintenance service period starts from the date of delivery.

Non-maintenance

We reserve the right to make such diagnoses as may be necessary in order to determine the cause of the defect and we will not provide a repair service under the following circumstances:

➤ The product has been lost before the arrival at the service location;
➤ The product is damaged due to the use of third-party or over-frequency software;
➤ Any product other than the Linzhi Phoenix;
➤ Scratches or other cosmetic damage to product surfaces that do not affect the operation of the product;
➤ Scrap;
➤ Fraud as determined by us, including, but not limited to, deliberately forging or replacing barcodes of the product or parts, or other attempts to obtain After-Sales Maintenance Service that the customer is not otherwise entitled to. A Linzhi Phoenix and/or parts that do not have the original barcodes will not be eligible for maintenance.

Maintenance with Charges

We reserve the right to charge fees for repair services under the following circumstances:
Product with an expired warranty: the warranty of the product has expired when the Support Ticket is created (as such date is indicated on our website)
The warranty will be voided due to:

➤ Product damage caused by improper installation, use, or maintenance;
➤ Product damage or failure caused by dropping accident, theft, abuse, negligence, improper operation;
➤ Product damage caused by physical interference, including but not limited to moisture, fire, flood, lightning, transportation, and extreme environment;
➤ The entire Product, the board, or components of the board are crushed, broken, burnt, dropped, damaged due to improper operation;
➤ Product damage caused by overvoltage or under voltage or leakage;
➤ Product damage caused by significant higher or lower ambient temperature exposure;
➤ Product damage caused by humidity, oxidation, corrosion, and short circuit to the product, units, or any part thereof;
➤ Product damage or loss caused by natural disasters, including, but not limited to, floods, lightning, fires, earthquakes, tsunamis and lightning strikes, etc.
➤ Disassembly or alteration of Product by any person other than us or an authorized service provider of us;
➤ Product damage or failure caused by the use of power supply, parts, or units which are neither supplied by us nor our authorized providers;
➤ Unauthorized changes on firmware and hardware;
➤ Product damage or failure caused by the use of unauthorized firmware or drivers, including but not limited to firmware that enables users to apply an over frequency setting;
➤ Product damage resulting from non-commonality and/or incompatibility with current and/or future versions of operating systems, software, and/or hardware;
➤ Damage or loss of data due to improper use;
➤ Product without an original barcode or SN label or which has been altered, defaced, or removed;
➤ Mixed boards: any or all of the hash boards or control boards in a product are not the original parts of such product, or anything preventing us from determining whether the hash boards or control boards are the original parts of such product;
➤ Direct operation of the product without being connected to drainage assemblies (applicable to products requiring connection to drainage assemblies);
➤ Daily wear and tear;
➤ Any reason is other than those caused by us makes it impossible for us to diagnose whether the product is under warranty.

Transportation for Maintenance

Please fill in the maintenance confirmation form which will be sent to you according to the instructions of our staff.
Please follow the instructions of the after-sales staff to deliver the product to the service location.
Under the following circumstances, we have the right to refuse to service your Linzhi Phoenix mining machine:

➤ You have not created a Support Ticket properly or at all.
➤ You have not filled in the Maintenance Confirmation Form sent to you by our customer support.
➤ The product you sent does not match the information in the Maintenance Confirmation Form
➤ The customer provided the wrong tracking number.

Fees and Payment

The exact amount of the service fee shall be determined at the time of service.
The customer will be notified about this before sending the product for repairs.

Compensation

If the new Linzhi Phoenix you received is damaged (the miner won’t boot), we will replace it with a new miner free of charge and reimburse the postage fees paid by the customer.
We do not provide free services to the parts of the miner dropped by third-party logistics.
We will reject to make compensation in the following situations:

➤ The miner has been used.
➤ The miner is destroyed by men or third-party services.
➤ The miner was dropped or damaged due to incorrect usage (wrong voltage input /installation).

Reimbursement of freight

➤ You must use the logistics channels designated by our customer support representative.
➤ You must provide corresponding bills and payment vouchers.
➤ The shipping fee will be refunded after the products arrive at the designated service point.

The Linzhi Phoenix ETH Miner

Linzhi Ltd. is proud to present you with the Phoenix model, the latest and most powerful Ethash ASIC miner on the market. After 2-year development, we have finally reached the point of publicly offering the Linzhi Phoenix 2600MH/s Ethereum Miner. Its state-of-the-art architecture will bring you the most profitable performance on the market. This ASIC miner can reach a hashrate of more than 2600MH/s at only 3000W per hour power consumption. The detailed specifications of the Linzhi Phoenix Ethereum ASIC miner are presented below.

Specifications:

Hashrate: 2600MH/s+
Power consumption: 3000W
Noise level: 80db
Size : 362 x 136 x 285 mm
Operating temperature: 5 – 45 °C
Net weight: 10,6 kg
Connection: Ethernet
Each Linzhi Phoenix ASIC miner contains two Linzhi E1400 hashing boards, which have the following technical features:
Each board uses 64 computing units (chips), each of which controls 72 mixers with a 2.8 Tb/s exchange rate with decentralized memory (1 MB in one cell)
8GB VRAM (This is the upgraded memory model which allows you to process the DAG file).
Memory subsystem bandwidth – 177 Tb/s per board.
Each memory mixer operates at a peak speed of 38.4Gb/s.
Each memory chip operates at an operating frequency of 600 MHz, using 2 cycles to access data.
When working with memory, 1024-bit addressing is used.
To power the Phoenix ASIC, you need to use two 12-volt power supplies with a capacity of at least 1800 watts each.
For cooling, two powerful fans are used, installed on the front of the ASIC case.
The back wall of the miner includes a gigabit Ethernet port; an SD card slot; two connectors for connecting additional cooling equipment.
Warranty Period：365 days – The after-sales maintenance service period starting from the date of delivery.

Linzhi Phoenix V2

The Linzhi Phoenix ETH Miner

Specifications:

Subscribe to our newsletter